EnglishEnglish
FRP Colorful Gel Coating Fiberglass Truck Panels Little Texture on The Surface for RV.
Home » Product » FRP Panel » For Refrigerator Truck » FRP Colorful Gel Coating Fiberglass Truck Panels Little Texture on The Surface for RV.

Product Category

contact us
: +8617333755091
: Jessica.ma@eastfrp.com
: 1876932133
: Liqiao Development Zone,Xuanzhou District,Xuancheng City,Anhui Province,China
Product Inquiry

loading

Share to:
sharethis sharing button

FRP Colorful Gel Coating Fiberglass Truck Panels Little Texture on The Surface for RV.

The fiberglass panels are made of thermosetting polymer and reinforced fiberglass,Stronger than steel and aluminum.
At ultra-high temperature and ultra-low temperature will not produce deformation and fission, Low thermal conductivity,It also has the characteristics of anti-aging, anti-yellowing, anti-corrosion, anti-friction and easy cleaning
Availability:
Quantity:
  • 1mm-3mm

  • ANCHE

  • AC100001

ADVANTAGE OF FRP PRODUCTS


1Light Weight and high strength

Fiberglass has a density of about 1.5,Four to five times lighter than steel,But it's a lot stronger,Tensile strength 90-130MPa, bending strength 140-300MPa

2Corrosion resistance

FRP is an excellent corrosion resistant material,Good resistance to acid, Alkali, salt and most organic matter, seawater and moisture,It is also resistant to microbial action,This property is particularly suitable for use in rainy, humid and coastal areas, as well as in places with corrosive media

3Good dimensional stability

The LINEAR EXPANSION COEFFICIENT OF FRP is 7.3 ~ 10 ~ 6 / °C, which is lower than that of steel and Aluminum Alloy and 1 / 15 of that of plastic,SO,The glass fiber reinforced plastic doors and windows have good dimensional stability, and the change of temperature will not affect the normal switch function of doors and windows.

4Good weather resistance

Glass fiber reinforced plastic is a thermosetting polymer, resin cross-linked after the formation of a three-dimensional network of molecular structure, into an insoluble melt, even if heated will not melt high-temperature performance. And the low temperature resistance performance is better

5Good insulation

FRP Is a good insulating material, it is not affected by electromagnetic waves, does not reflect radio waves, good microwave transmission, can withstand high voltage without damage. Therefore, fiberglass doors and windows have special uses for temporary buildings in the field and for buildings with communication systems.

6Colorful

FRP high hardness, can be painted with a variety of paint, made of various colors of windows and doors, to adapt to different styles and levels of building facade effect.   


ANCHE FRP PANEL ADVANTAGE


1 High Mechanical Performance   

2 Smooth surface, no edge warping

3 ACID and Alkali resistance, wear resistance

4 Easy to clean

5 Low surface fiber texture

6 Excellent water resistance

7 Low odor, in line with the national food grade requirements.


FRP PANEL STRUCTURE


Gel-coat

The surface of the FRP PANEL is sealed by Gel coating, which can effectively resist ultraviolet radiation and weathering.Poor quality fiberglass reinforced plastic surfaces are prone to cracking, especially white panels, which are susceptible to ultraviolet radiation. The surface of the fiberglass site will reflect more light than other areas.The use of high-quality Gel coat to improve the material's UV resistance and color durability, while increasing the gloss of the surface of the plate and making the surface not appear pores, cracking, scratches and other phenomena thus form a very beautiful and striking appearance. The GEL coat also provides greater resistance to corrosion and can be cleaned.

Fiberglass

Anche imported from abroad using glass fiber mat and fiber cloth, and resin bonding stronger, more soluble in styrene, at the same time anche products high strength, light weight, good toughness. The characteristics of good impact resistance are also well displayed.

Base

The substrate surface of the FRP panel is more flat, clean, no air hole, no crack, no scratch, adhesion is better.

海报

APPLICATION

 

FRP panels are widely used in buildings, refrigerated warehouses, refrigerated vehicles, trains, passenger cars, ships, food processing plants, restaurants, pharmaceutical factories, laboratories, hospitals, bathrooms, large supermarkets, schools and other places, such as walls, partitions, doors, ceilings, etc. .

SPECIFICATION :



Item

Parameters


Thickness

1.0mm-3.5mm


Package

Bulk or wooden case


Width

≤2800mm


Length

100m/roll & Customized


Colour

Customized




PHYSICAL PROPERTY:



Item

Units

Parameter

Testing Standard

Tensile StrengthFelt base

Mpa

60-90

GB/T 1447-2005

Tensile Strengthwoven roving

Mpa

90-150

GB/T 1447-2005

Flexural StrengthFelt base

Mpa

130-180

GB/T 1449-2005

Flexural Strengthwoven roving

Mpa

250-300

GB/T 1449-2005

Water absorption

/

0.24

GB/T 1462-2005

Density

g/cm3

1.3-1.5

/

Impact Strength

kj/

≥30

GBT 1451-2005

Barcol hardness

/

≥35

GB/T 1447-2005



                                                               WE ASSURE

1 Stable Quality
2 Quickly Response
3 Independent Laboratory
4.Delivery Fastly


            Packaging

1. pallet

2.Brown paper

3.wooden case.

4. According to customer requirements.

Delivery

1. Stock size 1-2 working days.

2. Custom size 7-15 working days.


package frp panelfrp panel package2

frp panel package 3


Previous: 
Next: 

Anson New Materials

Anhui Anche New Material Co., Ltd.Located in Xuanzhou Economic Development Zone, Xuancheng City, Anhui Province..Covering an area of 20000 square meters, it has two leading FRP production lines.

Quick Link

Product Categories

contact us

: Liqiao Development Zone,Xuanzhou District,Xuancheng City,Anhui Province,China
: +8617333755091
: Jessica.ma@eastfrp.com
: +8617333755091
E-mail Subscriptions
2019Copyright Anhui Anche New Material Co., Ltd. Yesdesigner
Leave a Message
Contact